top of page
Black Forest - Frenchic Al Fresco Weatherproof Inside & Outside Chalk Paint

Black Forest - Frenchic Al Fresco Weatherproof Inside & Outside Chalk Paint

Introducing Black Forest, a colour that defies categorisation – is it the quintessential black or a lush, velvety dark green?

 

With its intriguing blend of hues, Black Forest brings a touch of sophistication and intrigue to any interior space. Its versatility allows it to serve as a bold statement colour or a subtle accent, making it an ideal choice for adding drama and depth to your home decor. Whether used to paint an accent wall, highlight architectural details, or as a backdrop for artwork and furnishings, Black Forest exudes elegance and charm.

 

For an extra touch of glamour, consider pairing Black Forest with Cool Copper Frensheen. The warm metallic tones of Cool Copper complement the rich, deep hues of Black Forest, creating a stunning visual contrast that adds a sense of luxury and refinement to any room.

 

Versatile, multipurpose chalk and mineral paint for indoor and outdoor use.

 

  • Weatherproof and hardwearing

  • Matte finish

  • Self-priming

  • Self-sealing

  • Water-based


 

Suitable for


Multipurpose paint for interior and exterior use. Recommended for furniture and woodwork. Laminate, powder-coated radiators, metal, uPVC, ceramic wall tiles (we recommend avoiding very wet areas like showers/bath surrounds), kitchen cupboards, front doors and interior wood and concrete floors.


 

The Technical Stuff

 

  • Safe for use on children's toys - EN71-3 certified

  • Contains: Chalk, Clay, Titanium Dioxide, Resin, Talcum, Preservative


 

Coverage

 

  • A 750ml tin will provide a coat of up to 12.5m². For a durable finish, a minimum of 2 coats is required, so your 750ml tin should provide full coverage for 6m² on non-porous surfaces

  • Thinner application may affect durability

  • Porous surfaces will affect the rate of coverage and require additional coats

  • Always ensure you have enough paint for your whole project. When more than 1 tin of the same colour is needed, it is good practice to ensure batch numbers are identical or to intermix batches prior to commencing painting


 

Preparation

 

  • Ensure surfaces are in suitable condition for painting and clean, dry, free from wax, grease or penetrating substances and in sound condition. If previously painted, remove loose or flaking paint. Fill any holes/imperfections with a suitable filler

  • Remove any rust and apply a suitable metal primer - also apply primer to bare ferrous (iron based) metal

  • Recommended surface preparation in addition to the above – clean with Frenchic Sugar Soap, rinse, dry, hand-sand sufficiently to abrade the surface and/or to smooth any protrusions after filling. Wipe off any dust

  • You can watch Frenchic’s video on how to prep surfaces for painting here

  • To promote a smooth finish, treat porous surfaces like bare MDF, with an application of 2 coats of Frenchic Finishing Coat prior to painting

  • Exterior wooden surfaces in particular can retain moisture for up to 48 hours after rainfall or preparation. Ensure the surfaces are thoroughly dry prior to painting

  • Take care on opening the tin lid – a Frenchic tin opener is recommended

  • Stir thoroughly with a wide implement, such as a Paint Paddle, prior to each use


 

Application, drying and curing (hardening)

 

  • Apply with a good quality brush or roller

  • To allow self-levelling, avoid overworking the paint

  • Also suitable for spraying - thinning may be required with tap water up to 15%, apply additional coat(s)

  • For exterior projects, avoid painting in direct sunlight, only when the air and surface temperatures are between 10°C and 32°C and humidity is less than 85%. Do not apply if, in the following 48 hours, there is likelihood of rain, frost, fog, condensation or if the temperature is likely to drop lower than 10°C. This means that certain times of the year are unsuitable for painting outside projects - as a general rule of thumb Summer is recommended

  • Allow a minimum of 2 hours between coats (even if the paint feels touch dry)

  • Curing time is up to 2-3 weeks in normal conditions. Treat the newly painted surface with care until then

  • For floors, to avoid damaging the finish, do not walk on the area for 4 hours after painting and then with socks for the next 7 days. Also, try to keep pet paw claws off as well during this period. Do not allow the surface to become wet for at least a week. Continue to treat with care for up to 3 weeks

  • Painted floors may require maintenance


 

Clean up and storage

 

  • Reseal tin after use

  • Clean up any spills immediately with water

  • Wash brushes/rollers in warm, soapy water

  • Do not store where the tin could be subjected to damp, frost, freezing or high temperatures

 

 

Advice when choosing colours

 

We make every effort to match our online colour swatches to the paint but colours can vary depending on a number of factors, including screen settings. This means we cannot guarantee the paint will exactly match what you see on screen.  Please order a colour chart and samples or visit your local stockists to see the colours yourself.

PriceFrom £10.95
Quantity

Related Products

Square Logo.jpg
Klarna Logo.jpg
Clearpay Logo.jpg
PayPal Logo.jpg

We are here to help

Call us on

01288 352520

Visit us at

31 Queen Street, Bude, Cornwall, EX23 8AY

Facebook Logo.jpg

Message us at

Vivian.May.interiors.bude

Instagram Logo.jpg

Message us at

vivian_may_interiors

  • Facebook
  • Instagram
  • X
  • Pinterest

Vivian May Interiors & Lifestyle is a trading name of Smith & Co Enterprise Ltd.

Registered Office - 31 Queen Street, Bude, Cornwall, EX23 8AY

Company Number - 11212129

VAT Number - GB475908742

© 2025 Smith & Co Enterprise Ltd

bottom of page